|
|
- Moving Gantry
Machine with 1600mm x 3420mm (63 x 134-5/8) precision machined
Bakelite (laminated plastic) flat table with (2) vacuum zones so can
be operated like a twin table
- X Axis travel =
3378mm (133) Y axis travel = 1626mm (64), Z axis stroke = 325mm
(12-3/4); Boring capacity for X axis is 2591mm (102), for y axis
is 1181mm (46-1/2). Maximum programmable speed is 2700 inches per
minute for X and Y axis; 1080 for Z axis. X axis travel on high
precision prismatic guides and ground helical rack, Y and Z axis
travel via hardened ball screw
- 12 HP Fully
programmable Liquid Cooled cartridge type router spindle with
ceramic bearings HSK-63 type ATC; variable speed from 1000 -
20,000 RPM, RH and LH programmable rotation, pneumatic stroke is on
a prismatic linear guide for maximum strength and precision. The
spindle is served by a 12-position revolving-ride along tool changer
installed on the Z-axis board, it can perform the tool changes even
during boring operations
- (18) Independent
vertical spindles at 32 mm center distance, (12) of which are placed
along X axis and (7) along Y axis, Maximum tool diameter is 35mm,
maximum spindle stroke is 70mm
- (3) units for
horizontal opposed boring, (2) of which are placed along X axis and
(1) along Y axis to perform horizontal drilling on the 4-panel
sides. 2.3 hp inverter driven motor, spindle rotation speed 4000 rpm
- (1) 2 HP Grooving
Saw, 12000 RPM, 120mm diameter sawblade capacity
- Prewired for 360° C
Axis
- Holz Her META
Conversion System
- Work area with (6)
panel supports, (12) adjustable vacuum pods (2 pods per support),
laser positioning system for quick positioning of pods and with
value input from the controller according to part size and machining
required
- (2) Independent
working areas with double boring stop unit with (12) pneumatic pin
stops, (4) adjustable side pin stops, (6) pin stops located in the
rear of the machine and (6) pin stops located in the front of the
machine. Stops can be fitted with quick fit mushroom clamps for
clamping of small or awkward shaped parts
- Emergency stop rope
and pressure sensitive safety mats that will instantly place machine
in pause cycle when stepped on
- (2) Bekker 250
c/meter Vacuum Pumps HP, type in self contained cabinet
- TwinCAM 32 user
software with graphical user interface Features a Personal
computer control with 15 screen, (1) diskette drive, (1) CD-ROM
drive, PC-compatible US keyboard and mouse, barcode reader, Windows
operating system
- Alpha CAM Advanced
|
|
|
